Wood-mizer EE20S-EMR, User Manual

Page: 76 / 159

Maintenance & Alignment
EG300 Safety Devices Inspection (CE version only)
6
6-17 EGdoc022715 Maintenance & Alignment

Repeat the above step using the LEFT arrow on the Setworks control panel.
6. Maximum Blades Distance Safety Switch Inspection

Press and hold the RIGHT arrow on the control box until the blades distance setting is stopped;

Repeat the above step using the RIGHT arrow on the Setworks control panel.
7. Inspection of the Safety Switch Disabling Blades Distance Setting After Starting Sawing

Start the main motor;

Start the board feed;

Check if it is possible to move the blade in and out using the appropriate button on the control
box and then on the Setworks;
FIG. 6-12