6 | Wolf Customer Care 800.222.7820
Electrical
Installation must comply with all applicable electrical codes.
Locate the electrical supply within reach of the power
cord. For built-in applications, refer to installation instruc-
tions provided with the trim kit for electrical location.
ELECTRICAL REQUIREMENTS
Electrical Supply
grounded, 120 VAC, 60 Hz
Service
15 amp dedicated circuit
Receptacle
3-prong grounding-type
Power Cord
4'
(1.2 m)
GROUNDING INSTRUCTIONS
This appliance must be grounded. The microwave oven
is equipped with a cord having a grounding wire with a
grounding plug. It must be plugged into a wall receptacle
that is properly installed and grounded in accordance with
the National Electrical Code and local codes and ordi-
nances. In the event of an electrical short circuit, ground-
ing reduces risk of electric shock by providing an escape
wire for the electric current.
WARNING
Improper use of the grounding plug can result in a
risk of electric shock. Do not use an extension cord.
If the power cord is too short, have a qualified elec-
trician or service technician install an outlet near the
appliance.
Installation
The microwave oven can be installed in a standard or flush
inset application using accessory trim to match Wolf E
Series or L Series Ovens. Trim kits are avail able through an
authorized Wolf dealer. For local dealer information, visit
the find a showroom section of our website, wolfappli-
ance.com. Installation instructions are provided with the
trim kit.
The microwave oven can also be used freestanding. For
freestanding applications, a minimum 2"
(51)
space is
required at the top, rear, and sides of the microwave oven
for air circulation.
Installation
Rating plate location
RATING PLATE
