36
If you’ve received the
Login Failed
message in the
Terminal window
(3) several times, then repeat
these all above.
In the next possible failure status cases you can found some examples about the operation malfunction
and failure status. The figures will help you to identify about the proper situation.
No available signal strenght/no antenna fitted: in
case of CSQ 0 value, check that the antenna was mounted
and fitted to the device SMA antenna port and wait for 30
seconds and recheck the status by the Refresh button.
Note that min. CSQ 9-10 value is offered for the proper
communication.
Low signal strenght: in case of CSQ 1-9 values at the
information window. Please move the antenna to a
different position, wait for 30 seconds and recheck the
status by the Refresh button.
Note that min. CSQ 9-10 value is offered for the proper
communication.
Inactive SIM card or SIM failure: Check that the SIM
card was inserted properly. Contact with your mobile
operator that the SIM is active and available.
Cellular module failure: There is no available
IMEI
identifier, and you will receive the null values, and the
Status
is „
connected”
, then the module has been
malcuntioned, recheck the operation and call our support
line.
No SIM card presented or wrong SIM: When there
is no available
SIM ICC
identifier. Turn off the device, and
check the proper SIM card insertion, and start the device.
Reconnect and check the settings.
