19
By the
REBOOTDAY
parameter you can
enable
the industrial- and safety standard daily once
device restart event.
Push the Connect button for the cellular network
connection. (The button is active only if the USB serial
/ or TCP-IP connection is currently inactive (Close
status)).
(For login the necessary device IMEI and IP address
can be requested by the INFDEV or DEVSTAT SMS
text caommands.)
Hint: When you can connect on serial port, before
connecting it is useful to check the Serial Port tab
according to the description a.) shortly when the device will readout the value IMEI, IP data. Afterall
you can split the connection with the Close, then at the TCP-IP tab you can connect with the readout
data filling to the
Device IP
and
GPRS Login
fields.
When the device is trying to connect to the network,
you will see that the GSM STATE is
yellow
then
green -
but the GPRS STATE – wireless network
access – is still not available (color
yellow
).
Later, when the network registration was fine and the
Narrow Band wireless network is accessible, the
GPRS STATE status will be also
green
.
After the successful connection…
When connecting, the signal strength diagram and
status pictograms will be grey for a short time. This means that currently there are no available status
and signal strength values.
Later the
PIN/GSM/GPRS status – for the cellular
network reception -
and
signal (CSQ
) values will be
visible by colours.
During this time, the device transmits the life signal
and signal strength values frequently, according to
the settings.
When connecting to the cellular network, the
Easy
2S NB
checks the filled PIN code and will assign that
the password was accepter or not. (In case of PIN
failure it restarts the module.)
