4.9 IPSEC settings
Open
Network / IPSEC
to configure
Strongswan IPSec settings. In the
IPSEC
section, you can
set the Listen on interface option and then press the
button - the available interfaces will be
displayed.
Select one or more interfaces through which you want to use IPSEC.
Below, in the
IKEv1 Phase1 / Phase2
settings, you can use the
button to give a logical
name to the
IPSEC connection
, then select the
Encryption algorithm
and
Hash algorithm
,
and set the Diffie-Hellmann group to the tunnel.
Below, in the
Tunnel settings
section, the
button can be used to enter the settings for the
tunnel by entering a logic name again
. Local Subnet
and
Remote Subnet
indicate the IP address
range of the local and remote subnets.
