The device detects the 4G module and configuring. You only have to setup the
APN
you want to
use for the
WAN
(
ppp-4g) interface and the
PIN
code of the SIM (if it is presented).
The
Wireless Network
field gives you the opportunity to choose a
dedicated cellular technology or you can leave it on default value:
4G/3G/2G
–
which means the
Auto
mode.
This mode could grant the best speed and quality option (for
4G
selection), or the garanteed operation on any network (
fallback feature
for
4G/3G/2G selection (when the 4G cellular network service is not
available the 3G will be used
–
it 3G is not available, or 2G fallback will be used
–
when 3G or 4G
will be available again, it will switch back to 4G)
–
if
the internet module of the device
’
s
supporting this.
If you have to use a dedicated network like 3G, 2G, etc., then choose the required network type,
please. But
take consider, that the
„
fallback
”
feature will be inactive in this mode
–
if you
choose the
4G and it the network will be not available, there will not be provided 3G or 2G fallback
(if the choosen network is not available, the device
won’t get mobile network access)
. For fallback
always choose the
Auto
mode (4G/3G/2G setting).
If you choose the
No change
option, the device will be using the last known good configuration
here.
There you can also define the
SIM #1
APN
name for the Internet connection, which is necessary
to use.
If you will not set any value
for the
APN, the modem will restart the modem sequentially
in every ca. 10 minutes until it is not configured properly.
You can define SIM card
’s
PIN
code here - if it is necessary for the connection.
Note, that the
PIN
code which is already configured here, it cannot be seen here due to the security
rules
–
the characters are placed by asterix signs. Just modify the PIN if you would like to change.
Important!
If you need to change the PIN code, use the Network / SIM PIN Change menu item.
Authentication methods:
•
The
SIM #1
PAP/CHAP username
and
SIM #1
PAP/CHAP
password
settings can be
also configured here
–
if it is required for the connection.
