Translation of the original operating instructions
DUO
MIX
270
7
DM270_BAoDB_en_1507 • rs
Safety
2 Safety
This machine has been designed and manufactured with consideration to all
safety aspects. It reflects current engineering practice and the valid accident
prevention regulations. The machine left the factory in faultless condition and
guarantees a high level of technical safety. However, erroneous operation and
misuse result in a risk to:
➤
the life and limb of the operator or third parties,
➤
the machine and other property of the owner,
➤
the efficient function of the machine.
It is fundamentally prohibited to implement all methods of work that have a
negative influence on the safety of the operating personnel and the machine.
All persons involved in the installation, commissioning, operation, care, repair
and maintenance of the machine must have read and understood the operating
instructions beforehand – in particular the "Safety" chapter.
Your safety depends on it!
We recommend that the machine owner have this confirmed in writing.
2.1 Explanation of symbols
Safety information warns of potential accident risks and describes the
measures required for accident prevention. In the operating instructions
from
WIWA
, safety information is highlighted and labelled as follows:
DANGER
Signals a risk of accidents that are very likely to result in serious injuries and
even death, if the safety information is not observed!
WARNING
Signals a risk of accidents that may result in serious injuries and even death,
if the safety information is not observed!
CAUTION
Signals a risk of accidents that may result in injuries, if the safety information
is not observed!
Signals important information for correct work with the machine. A failure to
observe this may result in damage to the machine or its environment.
A range of pictograms are used in the safety information for accident risks that
may result in injury, depending on the hazard source – examples:
General risk of accident
Risk of explosion due to explosive atmosphere
