Translation of the original operating instructions
DUO
MIX
270
17
DM270_BAoDB_en_1507 • rs
Safety
➤
It is essential to observe the safety provisions applicable to the accessories.
You can find these safety provisions in the separate operating instructions
for the accessories.
2.7 Behaviour in an emergency
2.7.1 Bring the machine to a standstill and relieve the pressure
In an emergency you must bring the machine to a standstill immediately and
relieve the pressure.
1.
Close the compressed air shut-off valve on the maintenance unit.
2.
Set the levers at the mixing unit to "Circulation".
3.
Trigger the spray gun, until the material pressure has been fully relieved.
This process is not suitable for decommissioning. The machine is not flushed.
➤
For controlled decommissioning please observe Chap. 5.7 on page 35.
➤
After remedying the emergency situation, the machine must be flushed
(see Chap. 5.3 on page 33). Observe the pot life of the materials used.
2.7.2 Leaks
WARNING
In case of leaks, material may escape under very high pressure and cause
serious physical injuries and property damage.
➤
Bring the machine to an immediate standstill and relieve the pressure.
➤
Tighten threaded connections and replace defective parts (must be per-
formed by trained personnel).
➤
Do not seal leaks at connections and on high pressure hoses with the
hand or by wrapping.
➤
Do not patch material hoses!
➤
Check hoses and threaded connections for leak-tightness when starting
the machine up again.
2.7.3 Injuries
In case of injuries caused by processing material or solvents, always have the
manufacturer's datasheet ready to show the doctor (supplier or manufacturer
address, their telephone number, material designation and material number).
