Translation of the original operation manual
35
Airless 270_BAoDB_en_1405 • 0550022 • jw
Operation
³
Move the spray gun with your arm
and not with your wrist.
³
Already move the spray gun be-
fore pulling the trigger. That way,
you will achieve perfect, soft and
smooth overlapping of the spray
jet and avoid excessively thick
application of material at the be-
ginning of the spraying process.
³
Release the trigger before stop-
ping the movement.
Fig. 14
: Do not wave!
wrong
Area to be coated
thin
layer
thin
layer
thick
layer
³
Replace the spray nozzle before it is worn.
Worn nozzles cause higher material consumption and have a
negative effect on the quality of coating.
5.3
Flushing
Flushing the equipment is necessary:
³
At initial commissioning
The equipment has to be flushed with a cleaning agent to
ensure that the spraying material is not negatively affected by
the test medium that was used at the factory to test correct
functioning.
³
When changing materials
³
For work interruptions and at decommissioning
in the case of an interruption in spraying to flush spraying mate-
rial out before it sets.
Take note of the potlife of the materials used, particularly when
using two-component materials.
