6
WT-009 GSM Remote Control Device
WT-009– USER MANUAL – Rev.2.3 – Technical Support:
COPYRIGHT ©2008 WITURA CORPORATION SDN BHD
Access Mode. This command allows you to open only to people that are in the white list
or to anybody calling the SIM number.
•
#PWD123456#ACM0 (it is a zero)
Warning!
With the above command you allow free access to anybody calling!!
•
#PWD123456#ACM2
With the above command you allow only people that are in the white list. This is the
standard and recommended option.
#CAP
Change Password. Use this command to change the password with a new one that you
will chose for your device (don’t forget it or you will have to send the unit back to us to
reset it, and this has a cost!)
The #CAP command must be issued 2 times to be sure you don’t digit a wrong one. Of
course it must be preceded by the old password.
For example, to change the password 123456 into the new password 333444 you need
to send the following SMS:
•
#PWD123456#CAP333444#CAP333444
You will receive a confirmation with CAP OK if you wrote correctly.
#GOT
Gate pulse time. This command is useful in case you need to keep the button pressed
longer. The standard time is 1 second (Maximum 60 seconds) where 01=1 second,
06=60 seconds. You can change it with the GOT command.
The syntax of the command is the following:
•
#PWD123456#GOT02
With the above command the opening time has been set to 2 seconds.
#CSQ
Check GSM signal quality. This command is useful to see what is the GSM network signal
level your WT-009 GSM Remote Control Device is receiving.
If you send the command: #PWD123456#CSQ?