9
WT-009 GSM Remote Control Device
WT-009– USER MANUAL – Rev.2.3 – Technical Support:
COPYRIGHT ©2008 WITURA CORPORATION SDN BHD
The Input Alert Message can be edited and programmed up to 100 characters long. You
can change the displayed text by sending the following commands by SMS message to
the unit.
Text Command:
#STR=XXXXX…
XXXXX stands for the display text that you want to program
For example, if you want the alert message to display “Garage Opened!” when
received a text alert; you would send the following SMS message to the unit.
•
#PWD123456#STR =Garage Opened!
To turn on the function of input, you can send the following commands by SMS message
to the unit.
Text Command:
#CTR=X
X stands for
ON (
1
) or OFF (
0
) value
•
To turn on the input, the syntax of the command is the following:
#PWD123456#CTR=1
5.1.3 EDITING THE INPUT ALERT MESSAGE
5.1.4 TURN ON THE FUNCTION OF INPUT