14
WT-009 GSM Remote Control Device
WT-009– USER MANUAL – Rev.2.3 – Technical Support:
COPYRIGHT ©2008 WITURA CORPORATION SDN BHD
The output relays can be programmed to operate with special feature. After
programmed, it will activate both the output relays to stay on. When the unit receives a
call from the user, it will turn off relay for a certain time period and turn on again. To
program this function, you can send the following commands by SMS message to the
unit.
Text Command:
#FTRY=F
F stands for function 0 – 2
Function Descriptions
Function
0
:
•
This function is disabled ~ Normal Mode (Default)
Function
1
:
•
Relay 1 will turn off for 10 seconds and turn on again. After 30 seconds, Relay 2 will
be off for 5 seconds and turn on again.
Function
2
:
•
At a programmable time section, Relay 1 or 2 will turn off for a programmable time
(in seconds) and turn on again.
Note:
Once this function is used, the relays will operate automatically according to the
programmed time. Activation of relays with call will not work this time.
(For further setting of time and operating time please refer to 5.3.2 and 5.3.3)
•
To program the output relays to operate with function 2, the syntax of the command
is the following:
#PWD123456#FTRY=2
5.3
SPECIAL FEATURES FOR OUTPUT RELAYS
5.3.1 SETTING THE OPERATING FEATURE FOR OUTPUT RELAYS
