15
WT-009 GSM Remote Control Device
WT-009– USER MANUAL – Rev.2.3 – Technical Support:
COPYRIGHT ©2008 WITURA CORPORATION SDN BHD
The output relay can be programmed to operate at a programmable time.
To program
this function, you can send the following commands by SMS message to the unit.
Text Command:
#SMW=SS,MM,HH,TTT,G,R;
SS is a 2 digits value stand for seconds
MM is a 2 digits value stands for minutes
HH is a 2 digits value stand for hours
TTT is a 3 digits value stand for Turn Off time in seconds
G stands for Group number 1 - 8
R stands for Relay number 1 or 2
Example 1, assume you want output relay number 1 to turn off for 20 seconds on
8.30am, you would send the following SMS message to the unit.
•
#PWD123456#SMW=00,30,08,020,1,1;
Example 1, assume you want output relay number 2 to turn off for 30 seconds on
5.30pm, you would send the following SMS message to the unit.
•
#PWD123456#SMW=00,30,17,030,1,2;
Note: You can program up to 8 group of time section for each relay.
To set the time, you can send the following SMS command to the unit. The time is
entered in 24 Hour format.
Text Command:
#TSET=SS,MM,HH
SS stands for 2 digits value: Seconds
MM stands for 2 digits value: Minutes
5.3.2 SETTING THE OPERATING TIME FOR OUTPUT RELAYS
5.3.3 TIME SETTING