background image

1.6

Content of supply

After delivery, check the lift car frame for damage
and for full delivery of parts. The content of sup-
ply covers:

-

Car frame operating instructions manual

-

Safety gear operating instructions manual

-

Guide shoe operating instructions manual

-

Load weighing dev. operating instr. manual

-

Crosshead beam incl. rope pulleys
(pre-assembled)

-

Bottom Cross beam incl. safety gear and syn-
chronization
(pre-assembled and pre-adjusted)

-

Ringbeams

-

Diagonals and fixing brackets

Car Frame WCS60
Suspension 2:1 / 4:1

Operating instructions

Blatt/

sheet

D389MGB.005

Datum/

date

11.02.2002

Stand/

version

11.02.2002

Geprüft/

approved WAT/FLE

Änderungen vorbehalten!

Subject to change without notice!

Car Fr

ame WCS60

Suspension 2:1 / 4:1

Operating instructions

Car Frame WCS60 Suspension 2:1 / 4:1

Blatt/

sheet

D389MGB.000

Datum/

date

11.02.2002

Stand/

version

11.02.2002

Geprüft/

approved WAT/FLE

D389MGB

02.200

2

THE LMC LIFTCOMPONENTS MANUFACTURING AND COMMERCE COMPANY

No part of this publication may be reproduced or
translated, even in part, without prior written permis-
sion from WITTUR GmbH.

Änderungen vorbehalten!

We reserve the right to make alterations with respect
to the specifications and figures in this manual.

Subject to change without notice!

WITTUR GmbH

Sowitschstrasse 1 • A-3270 Scheibbs, Austria
Tel. +43 (0) 7482/42542-0 • Fax +43 (0) 7482/42542-32

http://www.wittur.at • E-Mail: [email protected]

Progr

. type safety gear 

SGB01, SGB02, SGB03, SGB05

Blatt/

sheet

D7A4MGB.000

Datum/

date

24.08.2001

Stand/

version

24.08.2001

Geprüft/

approved WAT/FLE

D7A4MGB

02.200

2

THE LMC LIFTCOMPONENTS MANUFACTURING AND COMMERCE COMPANY

Nachdruck, Übersetzung und Vervielfältigung in
jeglicher Form - auch auszugsweise - bedürfen der
schriftlichen Genehmigung der WITTUR AG.

Änderungen vorbehalten!

Änderungen gegenüber den in dieser Betriebsanlei-
tung aufgeführten Angaben und Abbildungen behal-
ten wir uns vor.

Subject to change without notice!

WITTUR GmbH

Sowitschstrasse 1 • A-3270 Scheibbs, Austria
Tel. +43 (0) 7482/42542-0 • Fax +43 (0) 7482/42542-32

http://www.wittur.at • E-Mail: [email protected]

Progr

. type safety gear  SGB01, SGB02, 

SGB03, SGB05

Operating instructions

Sliding guide shoes

Operating instructions

Sliding guide shoes

for car frame and counterweight

Blatt/

sheet

D622MGB.000

Datum/

date

24.01.2002

Stand/

version

24.01.2002

Geprüft/

approved WAT/FLE

D622MGB

01.200

2

THE LMC LIFTCOMPONENTS MANUFACTURING AND COMMERCE COMPANY

WITTUR GmbH

Sowitschstrasse 1 • A-3270 Scheibbs, Austria
Tel. +43 (0) 7482/42542-0 • Fax +43 (0) 7482/42542-32

http://www.wittur.at • E-Mail: [email protected]

No part of this publication may be reproduced or
translated, even in part, without prior written permis-
sion from WITTUR GmbH.

Änderungen vorbehalten!

We reserve the right to make alterations with respect
to the specifications and figures in this manual.

Subject to change without notice!

Sliding guide shoe

Guide rail lubricator

Electronic Load Weighing Device
WL

WD-M

Operating instructions

Electronic Load Weighing Device

Blatt/sheet

D961MGB.000

Datum/date

31.01.2002

Stand/version

31.01.2002

Geprüft/approved WAT/FLE

D96

1MGB

01.200

2

THE LMC LIFTCOMPONENTS MANUFACTURING AND COMMERCE COMPANY

No part of this publication may be reproduced or
translated, even in part, without prior written permis-
sion from WITTUR GmbH.

Änderungen vorbehalten!

WITTUR GmbH

Sowitschstraße1, • A-3270 Scheibbs, Austria

Tel. +43 (0) 7482/42542-0 • Fax +43 (0) 7483/42542-32

http://www.wittur.at • E-Mail: [email protected]

We reserve the right to make alterations with respect
to the specifications and figures in this manual.

Subject to change without notice!

Progressive type
safety gear

Instantaneous
type safety gear

or

Summary of Contents for WCS60

























Reviews: