1.3
Safety precautions
WITTUR machine installation or repair engineers
are chiefly responsible for the safe operation of
machinery.
It is essential to comply with and keep abreast of
all safety rules and legal obligations in order to
avoid personal / product damage during installa-
tion, maintenance and repair work.
Important safety advice and danger warnings are
emphasized with the following symbols:
General danger warning
High danger risk warning (i.e. crushing
edge, cutting edge etc.).
Risk of damage to machinery parts (i.e. due
to incorrect installation, or such like).
Important information sign
These operating instructions belong with the
whole installation and must be kept in a safe place
at all times (i.e. machine room).
The proper assembly and installation of WITTUR
car frames requires correspondingly well trained
fitting engineers. The responsibility of training lies
with the company appointed to carry out the
work.
Before starting installation work:
Only properly trained personnel may carry
out work, or be allowed access to the
installation site.
-
Attach safety devices to guard against falling
(platform or harnesses)
-
Cover any floor openings
-
Secure installation tools or objects against
accidental falling
-
Lift shaft openings should be cordoned off
and suitable warning signs should be erected
when working in shaft openings
-
Work involving electrical equipment should
only be carried out by an electrical engineer or
qualified personnel.
1.4
Preparation
Before beginning installation work it is in your
own interest to ascertain the constructional and
spatial conditions. Where (workshop or on site)
and when which installation operations can or
must be carried out. It is recommended therefore,
taking into account all the given circumstances, to
plan the various operational sequences in advance,
rather than carrying them out prematurely and in
an unconsidered manner.
On receipt of the delivery, the goods or compo-
nents should be checked for correctness and com-
pleteness with the order sheet
The details on the name plates should be com-
pared with the order sheet and also check:
-
that the factory and order number correspond
-
the rail head width and model
-
the total load (G)
-
the tripping speed
-
the rope pulley diameter, the number of rope
grooves and rope groove diameter are suited
to the ropes
Car Frame WCS60
Suspension 2:1 / 4:1
Operating instructions
Änderungen vorbehalten!
Subject to change without notice!
Blatt/
sheet
D389MGB.003
Datum/
date
11.02.2002
Stand/
version
11.02.2002
Geprüft/
approved WAT/FLE
