2.3
Installing Crosshead beam
The crosshead beam is delivered pre-assembled. It
contains the beams, the rope suspension pulleys
and adapter plates for the guide shoes.
(
1
) Lift in the crosshead beam into the uprights
(
2
) Fit the beam to the uprights. If necessary add
shims between beam and upright.
Take care of tightening torque
Screw M16: 195Nm
Screw M20: 385Nm
(
3
) Fit the guide shoe to the adapter plate (for
setting refer to operating instruction manuals
of guide shoe)
Car Frame WCS60
Suspension 2:1 / 4:1
Operating instructions
Blatt/
sheet
D389MGB.009
Datum/
date
11.02.2002
Stand/
version
09.09.2003
Geprüft/
approved WAT/FLE
Änderungen vorbehalten!
Subject to change without notice!
(
1
)
Remove lock-pin!
Screw ... M16x40 (32x)
Nut ........ M16
Safety nut ... M16
Shim
(
2
)
(
3
)
Screw ... M20x80 (12x)
