2.10
Finalizing Car installation
(
1
) Fix the upper car isolation to the car roof
channel (handtighten T-bolts)
(
2
) Fix the upper car isolation to the upright
Take care of tightening torque
Screw M12: 80Nm
(
3
) Tighten the T-bolts
Take care of tightening torque
Screw M10: 46Nm
Remove the wooden supports under the
car floor!
2.11
Tightening of diagonal rods
(
5
) Tighten the nuts (A) of all diagonals by hand
against the bottom fixing
(
6
) Tighten then the nuts (A) half a turn more, and
lock the fixing with the nut (B)
2.12
Car fixing bolts (isolated platform
support)
(
7
) Adjust the nut (C) so that the square washer
(D) has a distance of approx. 3mm to the sup-
port beam profile edge
(
8
) Push the square washer (D) against the nut by
means of the rubber ring (E)
(
9
) Lock the fixing with the nut (F)
(
1,3
)
M12x35 (12x)
Car Frame WCS60
Suspension 2:1 / 4:1
Operating instructions
Blatt/
sheet
D389MGB.015
Datum/
date
11.02.2002
Stand/
version
11.02.2002
Geprüft/
approved WAT/FLE
Änderungen vorbehalten!
Subject to change without notice!
(
2
)
(
5-6
)
A
B
(
7-9
)
C
D
E
F
T-bolt M10
