Assembly and Operating Instructions
– Industrial sectional door MakroPro 100
,
MakroPro Alu 100
3
EN
Technical description
IIiO/BS/MakroPro100/10/2015/ID-92974
A10 - top hinge
A11 - side hinge
A12 - cable break safety device
A13 - lock / bolt
A14 - bottom sealing
A15 - intermediate hinge
Ho - opening height
So - opening width
N - headroom
E - garage depth
W1 - sideroom L
W2 - sideroom P
BL - left drum (red colour)
BR - right drum (black colour)
L - cable length (stated in technical data sheet)
ZWK - external limit switch
WWK - internal limit switch
Pb - brown cable
Pg - green cable
Pw - white cable
Pbk - black cable
Pbl - blue cable
Pr - red cable
Py - yellow cable
Pyg - yellow-green cable
Pgr - grey cable
Fw - blanking function
Wp - switch output
Wt - test input (do not connect)
(figure number) a - refers to installation of the door with a bolt,
(figure number) b -refers to installation of the door with a lock.
[A000052]
- option
- manually operated
- automatic
[A000080]
the indoors, or inner side of the door
the outdoors, or outer side of the door
correct position or action
incorrect position or action
supervision
factory settings
[C000383] Do not stay, pass, run or drive under the
door when it is in motion. Before opening or closing,
ensure that no persons, and especially children or
any objects, are in the path of the moving garage
door. No persons, objects or vehicles are allowed to
stay within the clearance of the open door.
[C000384] Do not use the garage door to lift any
objects or people.
[C000385] Do not use the door when inoperable.
[C000386] Follow the Operating and Mainte-
nance manual to inspect and maintain the door.
Before commissioning the door and during its use
relubricate the rollers, hinges, guards, springs and
bearings.
[C000387] Close the wicket door and lock it with
the key before operating the garage door.
[C000388] Remove the protective film from the
door sheet metal skin immediately after installation.
[C000389] Do not remove or modify any compo-
nent of the garage door.
[C000390] Keep your hands and all objects clear
from the working range of all moving components of
the door and the door latch, lock and guides.
[C000391] Remove the protective film from the
glazing immediately after installation.
[C000392] Removing the panels from the packag-
ing. Do not discard the panel fixing screws, you can
reuse them to install the hinges.
[C000393] Protect the garage door in the packag-
ing against weather.
[C000414] Keep your hands and all objects clear
from the working range of all moving components
of the door padlock holder.
[D000011]
4. DESIGN DESCRIPTION AND TECHNICAL DATA
MakroPro 100 doors are designed as industrial doors as standard. The de-
tailed information about the dimensions and technical data is stated in the
price list.
The doors may be equipped with a outswing wicket door and glazed ele-
ments. More information is stated in the price list. MakroPro 100 sectional
doors are made of steel panels filled with Freon-free polyurethane foam. Mak-
roPro 100 ALU are made of aluminium profiles (without thermal barrier) with
single acrylic pane; the bottom steel panel is filled with Freon-free polyure-
thane foam. The doors are equipped as standard with anti-drop safety devices
in case of door leaf supporting cables breakage. In case of accident this
safety device blocks the door leaf in a safe position.
[D000008]
4.1. APPLICATION AND DESIGNATION
Sectional doors MakroPro are designed to be external construction barrier to
close garage and technical premises, industrial facilities, halls and warehouses.
When closed, the doors constitute tight vertical room partition. And when open,
the doors enable to drive in or out vehicles or industrial equipment. The anti-
corrosive protection allows to install the doors in corrosive environment C1, C2,
C3 according to PN-EN ISO 12944-2 and PN-EN ISO 14713.
