![background image](http://html.mh-extra.com/html/wise/tsw200e1/tsw200e1_manual_988957067.webp)
TSW200E1
5.9.1 - ROUND-TRIP DELAY Mode Configuration
The figure below displays the unframed circuits configuration screen.
FRAMED MENU
F1 F2 F3 F4
R OUN D -T RI P D E L AY
Interface:
Pattern:
Polarity:
Tx Clk Source:
Tx Rate:
RS232
63
NORMAL
INTERNAL
0064000 bps
To toggle to the structured circuits setup screen, press <F1> (FRAMED). The following
screen will be shown:
The setup for structured mode has three screens. To navigate among the screens use <F4>
(NEXT) and <F1> (BACK) keys. A description of the setup parameters for the Round-Trip Delay
mode follows.
•
Interface
: Available for the non-framed mode only. Selects which interface to use. The
options are V.24/RS232, V35, V36, X.21, RS530 or G.703-2M. To change an option,
place the cursor at the proper line and use the → or ← keys to select the interfaces.
•
Tx Clk Src
:
Can assume the following values:
Internal
: when the Test Set itself provides the transmit clock. In this case, the
external circuit must be prepared to receive external clock.
External
: when the transmit data are in sync with the external circuit clock. This
external circuit must be set up for internal or regenerated clock. For the G.703-
2M case, the external clock must be provided by the V.35 interface.
Note
:
Wise Telecommunications Industry
59
Summary of Contents for TSW200E1
Page 1: ...Operation Manual TSW200E1 Version 1 Revision 7 November 2010 ...
Page 2: ......
Page 4: ......
Page 8: ......