Wise TSW200E1 Manual Download Page 64 | Manualshive

Page: 64 / 100

background image

TSW200E1

F1 F2 F3 F4

FAS = 00000000

NFAS = 00000000
MFAS = 0000

NMFAS = 0000

MONITOR - RUN

WORDS

DATA ABCD1 ABCD2

If the frame structure is PCM30 or PCM30C, it is possible to monitor the CAS state for all

30 telephone channels simultaneously. To do this, press <F3> (ABCD1 – channels 1 to 15) or <F4>
(ABCD2 - channels 16 to 30). The channel marked with “

✓

” indicates busy channel; otherwise, the

channel is idle. This analysis takes into account the selected idle code.

Appendix A details the PCM30C and PCM31C frames, making it easy to locate the status

and channel words. For example, when it is desired to monitor in real-time the signalling changes of
the associated channel (CAS) for any telephone channel, choose the value 16 for the timeslot
parameter, and change the frame to monitor the ABCD bits of each channel (Example: Frame=1
indicates channels 1 and 16, Frame=2 indicates channels 2 and 17, etc.).

The figure below demonstrates the realization of a test in the Monitor mode.

5.8 - FREQUENCY/LEVEL Mode

In this mode, the TSW200E1 allows one sinusoidal signal or data from the microphone

to be

inserted in any timeslot of a 2048 kbps G.704 frame. This sinusoidal signal can have user-definable
level (from -55 to +3 dBm0) and frequency (1 to 4000 Hz).

Simultaneously, the TSW200E1 analyses and evaluates, for the same timeslot of a received

frame, the level and the frequency of a sinusoidal signal sampled using PCM A-law. The level
ranges from -55 to +5 dBm0 and the frequency ranges from 1 to 4000 Hz. The TSW200E1 also
monitors, in dBm0, a tone in any timeslot, decoding the structured 2048 kbps signal. Thus it allows
the audio output of one timeslot to be user monitored in the internal loudspeaker.

The frequency/level mode allows testing a voice frequency multiplexed card. The test can be

done by setting analogue loopback on the subscriber end. The performance of this loopback is
evaluated in the 2048 kbps interface.

Besides this analogue loopback, it is possible to employ an analogue frequency/level test to

Wise Telecommunications Industry

56

«
...
62
63
64
65
66
...
»

Summary of Contents for TSW200E1





































































































Reviews:

No comments

Related manuals for TSW200E1

Brand: D-Link Pages: 73

Brand: Quintum Pages: 2

Brand: StarTech.com Pages: 2

Brand: Cudy Pages: 2

Brand: Waters Network Systems Pages: 12

Brand: hager Pages: 2

Brand: Gefen Pages: 11

Brand: UniFi Pages: 8

Brand: Woxcon Pages: 42

Brand: E&C Pages: 10

Brand: Accton Technology Pages: 7

Brand: Radio Systems Pages: 19

Brand: 3onedata Pages: 2

Brand: Network Technologies Pages: 7

Brand: H-Tronic Pages: 15

Brand: Cumberland Pages: 2

Brand: Black Box Pages: 76

Brand: DeLOCK Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands