8
WPS-550-BUL-IP Installation Manual
3. Package Contents
NOTE: A POWER SUPPLY IS NOT INCLUDED WITH THIS CAMERA.
The PS-12DC-1A, WPS-PS multiple output power supply
or a Power over Ethernet (PoE) switch is recommended.
4. Required Items for Installation
The following items are required during the installation of a Wirepath™ IP camera. Prepare all parts and tools in advance to ensure
that the installation can be performed smoothly.
•
Local Ethernet network installed
• All cameras to be installed in the system
•
PoE Ethernet equipment or power supplies and wiring to power cameras
•
Network connection at each camera location
•
Access to a PC connected to the local network
•
Static IP address to assign to the camera
•
Additional access information for network equipment:
•
Router / Switch Details – Contact the network admin to obtain access to equipment settings
•
Admin Rights – Required to set up the network and port forwarding for remote access
•
Default Gateway
•
Subnet Mask
•
DNS Address
•
Recommended for mounting cameras and wiring:
•
Hand tools
•
Drill (May be needed for mounting the camera)
•
Extra connectors for terminating cables on the job
• (1) WPS-550-BUL-IP Camera
• (1) WPS-ACC-PWR Power Adapter
• (1) BNC Test Adapter
• (1) Female to Female RJ45 Adapter
• (1) 3mm Allen Key
• (4) Screws
• (4) Wall Fasteners
• (1) Spare Silica Pack
• (1) Quick Start Guide
