WPS-100-NVR-4IP Installation Manual
Pg. 12
© 2013 Wirepath™ Surveillance
6.3- IR Remote
1
2
3
4
5
6
7
8
9
10
11
12
13
10
11
12
18
14
15
16
19
13
17
1. Record
Starts and stops recording of the currently displayed image.
2. ID 1 to 8
Sets the IR Remote to control an NVR set to that ID.
3. Zoom
Digital Zoom of currently displayed Camera.
4. Menu
Displays OSD Menu, or Exits the current menu.
5. PTZ
Opens the PTZ menu to control a connected PTZ Camera.
Note: The menu will not appear if the selected camera is not a PTZ Camera.
6. Navigation Buttons
Navigates the NVR right side menu, PTZ controls, and OSD menus.
7. Enter
Starts the action for the currently selected menu or control item.
8. Auto
Cycles through Cameras assigned to channels of the NVR when on Single View,
and cycles through Split Screens when in Split Screen View.
9. IP Cam
Opens the Quick Setup menu to assign IP cameras and Encoders to an NVR
Channel.
10. Rewind
Rewinds the currently playing recorded content.
11. Stop
Stops the currently playing recorded content.
12. Play
Opens a menu to Search by time or Event, backup recorded content, or view the
system log. Press Menu to exit.
13. Fast Forward
Fast Forwards the currently playing recorded content.
14. Skip Back
Skips backwards in currently playing recorded content.
15. Copy
Opens the “Backup” window and allows copying video between selectable
Start/End times to an attached USB flash drive or hard drive.
16. Skip Forward
Skips forwards in currently playing recorded content.
17. Number Buttons
Direct selection of channels, display single view of the selected channel number.
18. Display
Turns image overlay On or Off.
19. Return
Cycles through previously selected channels of the NVR.
