WirelessHART Fieldgate SWG70, Operating Instructions Manual

Page: 67 / 124

WirelessHART Fieldgate SWG70 10 Engineering
Hauser 65
Input Status parameters
Parameter Meaning Example Default
Table
Register Defines the start register for the Digital I/O device values
– For Input Status the first value is normally 1
– The initial value can be overwritten only after a device has been
selected in the Long Tag drop-down menu
– Subsequent start registers are automatically generated
1 1
End Register End register for Digital I/O device values (generated automatically) 8 65536
Long Tag Click to open a drop-down list of connected network devices – –
IO-Card Identifier of fieldgate card used by the device – –
Channel Identifier of card channel used by the device – –
Value Click to open a drop-down list of values for the selected device
– Least Significant Byte: maps bits 0 - 7 of a UINT16 to one register
each
– Most Significant Byte: maps bits 8 - 15 of a UINT16 to one
register each
– –
Value field Enter an appropriate value into the field which opens when a value
is selected
– 0: the 1st discrete value of a device is mapped
...
255: the 256th discrete value of a device is mapped
0 0
Delete button Depending upon position, deletes the table or the table line – –
Generate
Start Register Defines the start register for the first Digital I/O device
– For Input Status this is normally 1 1 1
Generation Order Order in which the devices are mapped to the Modbus registers.
• Index: According to the index number, see Instrument List,
Chapter 10.1, for example
• Alphabetical: In alphabetical order according to the Long Tag
• Alphabetical (sub-device): In alphabetical order according to the
Long Tag of the sub-device.
• IO card & channel: According to the IO card & channel number
of the wireless device.
• IO card & channel (sub-device): According to the IO card &
channel number of the sub-device.
– –
Value Click to open a drop-down list of values for the selected device
– Least Significant Byte: maps bits 0 - 7 of a UINT16 to one register
each
– Most Significant Byte: maps bits 8 - 15 of a UINT16 to one
register each
– –
Value field Enter an appropriate value into the field which opens when a value
is selected
– 0: the 1st discrete value of a device is mapped
...
255: the 256th discrete value of a device is mapped
0 0
Delete button Depending upon position, deletes the table or the table line – –
Generate Writes mapping table to table in Table tab – –
Delete all mappings • Checked: Overwrites any table already in Table tab
• Unchecked: Adds any new devices found to existing table – –
Controls
Import Imports a mapping table in CSV format – –
Export Exports the current mapping table in CSV format – –
Refresh Loads the mapping table currently stored in Fieldgate SWG70 – –
Apply Stores the current mapping table to Fieldgate SWG70 – –