WirelessHART Fieldgate SWG70, Operating Instructions Manual

Page: 10 / 124

2 Identification WirelessHART Fieldgate SWG70
8 Hauser
2.2 Device designation
The device designation together with other information is to be found on the nameplate affixed to
the front of the Fieldgate, see Fig. 2-1.
Fig. 2-1: Nameplate
The device type can be derived from the order code as follows:
2.3 Licensing agreement
The Product CD-ROM and FieldCare Device Setup DVD supplied with the WirelessHART fieldgate
contain a number of components that are required for its commissioning. These can be installed
free-of-charge on the computer to be used with the Fieldgate.
Information on the various Windows versions supported is to be found in the folder System
Requirements on the Product CD-ROM.
The full licensing agreement is also to be found on the CD-ROM. The software required for start-
up and commissioning, i.e. the Internet browser, is either freely available or is subject to the
licensing conditions of its manufacturer. Installation of this software on your computer implies that
you accept the terms of the corresponding licensing agreement.
1 Order code 3 Type of protection, if any
2 Serial number 4 Telecommunication compliance
CMIIT ID 2011DJ5310
1 2
3
4
WirelessHART Fieldgate SWG70
Approvals
AA
BG Non-hazardous area
ATEX II 3G Ex nA II T4
Output
1
9 Et RS-485 + HART; OPC + Modbus
Special version
Service
IK
IW Customized configuration
Without tooling DVD (FieldCare Setup)
Marking
Z1 Tagging (TAG)
52006327: Self-adhesive paper label
52006328: Supplied label/plate
SWG70- Product designation