WirelessHART Fieldgate SWG70, Operating Instructions Manual

Page: 33 / 124

WirelessHART Fieldgate SWG70 7 Commissioning
Hauser 31
5 Change the IP address and the Subnet Mask of the host computer to match the IP address of
the Fieldgate.
–
IP Address 192.168.1.XXX and network mask (Subnet Mask) 255.255.255.0.
6 Click on the OK button to complete the procedure, close the other dialogs with OK and
Close .
7.2.2 Check the connection
The simplest way to check the connection is to call up the Fieldgate SWG70 Web Server:
1 In your Internet browser enter the address of Fieldgate SWG70: 192.168.1.1 and press Enter :
2 Accept the site certificate in the dialog which now appears.
3 Now the Login of the Web page appears. To open the Fieldgate SWG70 Web pages
– Enter User name (default: admin) and Password (default: admin) and press OK
4 If you are not able to connect to the Fieldgate:
– Ping the Fieldgate using the Command prompt
– Check that any proxy server is switched off or not used for this address range
– Check ports 80, 443, 502 and 5094 in all firewalls are open
– Check that you have the correct Ethernet cable (crossover for direct PC connection)
– Check that the Ethernet cable has been correctly connected, Chapter 5.3
– Check your IP address setting again