WirelessHART Fieldgate SWG70, Operating Instructions Manual

Page: 35 / 124

WirelessHART Fieldgate SWG70 7 Commissioning
Hauser 33
7.4 Installing FieldCare
If you do not already have FieldCare running on your computer, you can install FieldCare Device
Setup from the corresponding DVD: will normally start automatically, otherwise via setup.exe.
7.4.1 Installing the Fieldgate DTM and HART IP CommDTM
1 Insert the Fieldgate CD ROM into the CD ROM drive: the setup program starts:
– If this is not the case, double click on Setup.exe to be found in the Fieldgate SWG70 folder
2 Click on WirelessHART Fieldgate DTM : the DTM Setup Wizard starts:
– Press Next to continue
3 The Licence Agreement dialog appears: read and accept it, then press Next to continue
– If you do not accept the licence agreement, the wizard closes
4 In the Customer Information dialog, enter details of the user, then press Next to continue
5 In the Choose Setup Type dialog, select Complete
– If the wizard has found an earlier version of the DTM, press Upgrade
6 DTM Setup Wizard now locates the FieldCare HART DTM folder and displays it in the
Ready to Install dialog: press Install to start installation
– A progress bar indicates the state of installation
7 When installation is complete the successfully installed dialog appears:
– Press Finish to close the dialog and finish the installation
8 Repeat the procedure for the HART IP Communication DTM
9 If you intend to use the HART OPC server you can also install it in approximately the same
manner from the HART OPC Server menu item
10 Press " X " in the Setup Welcome dialog to close the setup program