14
A and B ends of RS485 can be connected with the Rx+, Rx- on PTZ or High Speed Dome. After all the above
connection, please enter the “PTZ” menu to setup camera and PTZ address, baud rate, PTZ protocol. After the
setup, please control them by running the DVR_WEB software. About the DVR_WEB setting please refer
“Chapter
Ⅶ
”.
WARNING: PLEASE SET ALL OF THE PTZ ADDRESSES DIFFERENTLY.
Note: Please do not connect RS485 and RS232 simultaneously.
Section 6
Voice Communication
Fig. 6
In the above illustration, the up icon is an ear phone socket and the down icon is a MIC phone socket. After the
DVR_WEB software has connected with the host, and also the ear phone and MIC phone be connected. Click the
intercom icon on the DVR_WEB, a two-way communication can be realized. In the meantime, audio input from
DVR can be heard on PC; audio input from PC can be heard on audio output of DVR.
About the DVR_WEB setting please refer “Chapter
Ⅶ
”.
NOTE: 1. Audio input of Voice Communication will take up the audio input of the first channel (A IN1). Audio
output of Voice Communication will take up the audio output (A OUT).
2. Active device is requested while using intercom function.
