25
Section 6
Basic Parameter Setup
Enter “Main Menu
－
Advanced
－
General” as shown in Fig. 16.
Fig. 16
Move cursor with
and
on the front panel and select item with
and
.
Remote Control:
When you use IR controller to operate DVR, you must use DVR address to select DVR. If
there are more than one DVR in one place, please define different address for each DVR. The default address
is “001”, the value field among 001-255.
DVR Name
：
Define DVR name. When you access DVR remotely, you can find all the DVR intuitively by
their names .If you want to modify the DVR name, please move cursor to DVR name edit box and press
“
” key to enter into input mode.
Video Format
：
Auto adapt according to video input. When video format is changed on operation, you need
to reboot the DVR to take effect.
Alpha
：
Adjust menu contrast. (Range from00 to 99. 99 stands for low contrast).
Auto logout: “
Off”: Only can logout manually in “Maintain”
→
“Logout”. “On”: Logout automatically in
the time set in idle time box which will show only “On” is chose.
Idle time
：
Length of time during which no operation is executed. Default Idle time: 5 minute.
VGA Resolution (Option)
：
Setup VGA output resolution. There are following options: 800*600, 1024*768,
and 1280*1024. Default: 1024*768.
