28
In this case, DVR can save HDD usage and network bandwidth.
If you select CBR, DVR will use the fixed bit rate to compress image.
Frame Rate:
Frame per second. Options are: 25
（
PAL:25, NTSC:30
）
、
13
、
6
、
3
、
1. Default frame rate: “25”
Quality:
Define the image quality. There are 5 options: Basic, Medium, Good, High, and Best. High image
quality needs high bit rate size. Default quality: High
In the course of setting up the parameters, if the parameters needed to be set the same in all channels, you can
select ‘
ALL
’ after finishing the setup of parameters of one channel. The system will prompt a dialog box. When
pressing ‘
OK
’, parameters setup for all channels will be achieved.
Manual Recording
Press “
●
” button on the panel to enter into “Manual Record” interface directly.
图
20
1-4 CH Status:
“
√
” and “
×
” on up side stand for recording status. “
√
”means recording, “
×
”means
idle.
1-4 CH Start/Stop recording:
Squares on downside are used to start/stop recording of the
corresponding channel. Press “
” and “
”on the panel to select channels. Press “
” and “
” to
start/stop recording.
Record:
Press this button to start all channels recording.
Stop:
Press this button to stop all channel recording.
Return:
Press this button to close the Manual Record window.
Check channel recording status in the red circle of status bar as shown in the following Fig.
