Wincor Nixdorf TH320, Programmer'S Manual

Page: 54 / 157

Programmers Guide TH320/420
46
Text strike - through mode
ASCII GS 0 x 85 m n
Hexadecimal 1D8 D nm
Decimal
29 141nm
Value of m
0 = retain same color as the character itself
1 = black
2 = paper color
Value of n standard cell height
Default
n = 0 (off)
Print a strike-through over characters. If the strike-through is as wide as the cell height, this will
produce a cell that will be printed as a solid current color.
When characters are greater than normal size, such as double-high, the number of character rows claimed
by n also increases proportionally, such as doubling for double-high cells. Location of the strike-through on
a cell is on a cell-by-cell basis, so mixing cell sizes on the same print row will give uneven results.
Select super script or subscript modes
ASCII AX ENQ n
Hexadecimal 1F 05 n
Decimal 31 05n
Value of n
0 = Normal character size
1 = Select subscript size
2 = Select super script size
Default 0 (normal size)
Turn superscript or subscript modes on or off. This attribute may be combined with other characters size
settings commands (12, 13, 1B 21 n, 1D 21 n…)
This command is available only on the receipt station.
Exceptions
This command is ignored if n is out of the specified range.
Graphics
These commands are used to enter and print graphics data and are described in order of their
hexadecimal codes.
Download BMP logo
ASCII ESC (+*.BMP file)
Hexadecimal 1B (+*.BMP file)
Decimal: 27 (+*.BMP file)
Value
Maximum width = 576
Maximum height = 512
Enter a downloaded BMP logo into RAM or flash.
The downloaded BMP logo can be printed by using the print downloaded bit image (1D 2F m)
command.