Wincor Nixdorf TH200 Programmer'S Manual Download Page 11

Page: 11 / 106

Programmer’s Guide

TH200

host computer) goes to MARK before n is transmitted and then

DLE

EOT 3

interrupts before n is received, the code <10>H for

DLE EOT 3

is processed as the code for

ESC 3

<10>H.



Even though the printer is not selected using

ESC =

(select peripheral device), this

command is effective.



The printer transmits the current status. Each status is represented by one-byte data.



The printer transmits the status without confirming whether the host computer can

receive data.



The printer executes this command upon receiving it.



This command is executed even when the printer is off-line, the receive buffer is full, or

there is an error status with a serial interface model.



With a parallel interface model, this command is ignored.



When Auto Status Back (ASB) is enabled using the

GS a

command, the status

transmitted by the

DLE EOT

command and the ASB status must be differentiated..

n = 1: Printer status

Bit

Off/On

Hex

Decimal

Function

Off

Not used. Fixed to Off

Not used. Fixed to On

Off

Drawer open/close signal is LOW (connector

Drawer open/close signal is HIGH (connector

Off

On-line.

Off-line

Not used. Fixed to On

5,6

Undefined

Off

Not used. Fixed to Off.

n = 2: Off-line status

Bit

Off/On

Hex

Decimal

Function

Off

Not used. Fixed to Off

Not used. Fixed to On

Off

Cover is closed.

Cover is open

Off

Paper is not being fed by using the

Paper is being fed by the FEED button

Not used. Fixed to On

Off

No paper-end stop.

Printing is being stopped.

Off

No error.

Error occurs

Off

Not used. Fixed to Off

Bit 5: Becomes on when the paper end sensor detects paper end and printing

stops.

Summary of Contents for TH200











































































































Search results

Summary of Contents for TH200

Reviews:

Related manuals for TH200

Brands by name

Popular brands

Wincor Nixdorf TH200, Programmer'S Manual

Search results

Summary of Contents for TH200

Reviews:

Related manuals for TH200

Brands by name

Popular brands