
Important Notes
BEETLE /moPOS "Getting Started"
1
1
Important Notes
The following safety instructions should be read carefully and strictly observed when
handling technical appliances and before doing any work on the device. Further safety,
installation, operating and maintenance instructions can be found in the manuals available on
the internet:
http://www.wincor-
nixdorf.com/internet/site_EN/EN/Support/Downloads/downloads_node.html
Should you have any questions, please contact your dealer or our service department.
Devices supplied by Wincor Nixdorf International GmbH (WN) comply with the respective
safety regulations for data-processing devices and information technology devices, including
electrical office equipment for use within an office or store environment.
Always consult
the installation and operating instructions before doing any work
with an appliance. These manuals are available on the internet (see above).
If an appliance is brought into the service area from a colder environment,
condensation may occur. The appliance must be absolutely dry before activation. This
requires an acclimatization time of at least two hours.
Observe warning and information labels on the device.
Appliances that are equipped with safety tested power cables must be plugged into a
grounded socket.
Always lay the supply leads and cables in such a way that they cannot be stepped on
or tripped over.
Make sure that there is always free access to the grounded sockets used or to the
electrical circuit-breakers of the house installation.
Check that the set nominal voltage of the appliance corresponds to the local mains
voltage.
In order to completely separate the appliance from the mains voltage, switch off the
appliance and disconnect it from the mains.
Ensure that no foreign objects (e.g. paper clips) or liquids enter the housing of the
appliance. This may result in electric shock or short circuit.
Always keep the ventilation slots free of obstruction to ensure adequate air
circulation and avoid overheating.
Data cables must not be plugged in or unplugged during electrical storms.
Always hold the plug when removing the power cable or other cables. Never pull the
cable itself. Have damaged power cables replaced immediately.
Only use accessories and extension components that have been approved by Wincor
Nixdorf. Nonobservance can result in damage to the device or violations of
regulations concerning safety, radio interference and ergonomical requirements.
Protect the appliance from vibrations, dust, moisture and heat.