21
Comple:ng the Installa:on of the Appliance
Remove the protecve covering (if applicable) from the face of the decorave trim. Fit the trim to the appliance
very carefully ensuring the outer trim clip assemblies sit correctly within the outer box.
This advice
must
also be passed onto the consumer to ensure that they are aware of trim removal and
reinstallaon for baMery changes—see page 20 for details of electronic igniter locaon.
REFIT THE TRIM AND OUTER TRIM
Recheck the appliance operaon and complete the appliance Commissioning Checklist on page 38
Secure the trim by fi8ng the two screws at the top of the trim as shown in the diagram above.
Check that the outer trim assembly is si8ng correctly in the sloMed brackets located around the enre
perimeter of the main trim body.
