31
The following instrucons detail how the ceramic fuel components are to be installed onto the
appliance. Great care should be taken when handling these ceramic parts as they are fragile and can
easily be broken. Do not force any component into posion, if it does not fit easily then you are not
fi8ng the part correctly. These instrucons can also be followed to remove or reinstall the fuel bed
aer cleaning. This is a procedure that can be undertaken by the customer as required and the
frequency will be depend upon use.
See page 6 for details on how to open and close the door.
Fit the volcanic rock onto the burner as shown in the picture below.
Ensure that
NO VOLCANIC ROCK
is placed in the area shown in the white boxes.
FUEL BED LAYOUT
Ensure the secondary airways are
not blocked by the volcanic rock
