49
6 Adjustment with the display and adjustment module
WIKA Operating Instructions - Differential pressure transmitter DPT-10
Display unit
Volume
l
Scaling
0 % = 0.0 l
100 % = 100.0 l
An integrated background lighting can be switched on via the adjust-
ment menu.
The function depends on the height of the operating voltage, see
operating instructions of the respective sensor.
In the default setting, the lightning is switched on.
The respective min. and max. measured values are saved in the sen-
sor. The values are displayed in the menu item "
Peak values
".
•
Min. and max. pressure
2)
•
Min. and max. temperature
3)
Peak value indicator
The instrument status is displayed in this menu item. If no failure is
detected by the sensor, "
OK
" will be displayed. If a failure is detected,
there will be a sensor-specific flashing fault signal, for example
"
E013
". The failure is also displayed in clear text, for example "
No
measured value available
".
Information:
The fault message as well as the clear text indication are also carried
out in the measured value display.
Meas. certainty
Sensor status
Available with the trend curve:
•
"X-Zoom": Resolution in minutes, hours or days
•
"Stop/Start": Interrupt a recording or start a new recording
•
"Unzoom": Reset the resolution to minutes
Display - Backlight
Diagnosis - Peak value
Diagnostics - Device
status
Diagnostics - Trend curve
2)
Pressure: -50 … +150 % of the nominal measuring range.
3)
Temperature: -50 … +150 °C.
