57
6 Adjustment with the display and adjustment module
WIKA Operating Instructions - Differential pressure transmitter DPT-10
Service
Basic adjustment
4
Display
Diagnostics
▶
Service
Info
Simulation
4.2
Start simulation
▼
Reset
4.3
Select reset
▼
Language
4.4
Deutsch
▼
Copy sensor data
4.7
Copy sensor data?
PIN
4.8
Enable?
Info
Basic adjustment
5
Display
Diagnostics
Service
▶
Info
Instrument type
5.1
Serial number
12345678
Date of manufacture
5.2
Software version
Last change using PC
5.3
Sensor characteristics
5.4
Display now?
6.12 Saving the parameterisation data
We recommended writing down the adjustment data, e.g. in this op-
erating instructions manual, and archiving them afterwards. They are
thus available for multiple use or service purposes.
If DPT10 is equipped with a display and adjustment module, the
most important data can be read out of the sensor into the display
and adjustment module. The procedure is described in the operating
instructions manual "
Display and adjustment module
" in the menu
item "
Copy sensor data
". The data remain there permanently even if
the sensor power supply fails.
If it is necessary to exchange the sensor, the display and adjustment
module is inserted into the replacement instrument and the data are
written into the sensor under the menu item "
Copy sensor data
".
