6 Commissioning, operation
WIKA Operating Instruction, Model Pascal ET, ET-P, ET/IS, ET-P/IS 77
GB
6.7
Data Logger
Options are available on the screen for the Functions Setting (see paragraph 6.5.2.):
Figure 83
– Logger screen
On the LOGGER column, the following options are available:
LIST
set up of the Logger
SETUP
View Logs data
DELETE ALL
delete all the Logs
With this function you can configure the data logger for all 4 channels simultaneously.
Selecting SETUP, “Data Logger Setup” will be displayed as per the below:
Log Name
Name of the Log (compulsory)
Sampling time
sampling time between 2 measurements (hours, min., sec.)
Sampling length
total time of the logging
Pressing START, the logging process will start:
Figure 84
– Logger data setup
The flashing of the disc icon, on the bottom right side of the screen, shows that the LOGGER is
active. The data will be stored on all 4 Channels (if assigned) simultaneously