6 Commissioning, operation
WIKA Operating Instruction, Model Pascal ET, ET-P, ET/IS, ET-P/IS 39
GB
The following screen appears:
Figure 24
– Selecting the source “P”
Automatically the program shows the following screen and it remains in this position until the
operator points out what type of parameter he desires to associate to a selected channel, for
example to the Channel A. In this case press P for pressure.
Figure 25
– Pressure parameter selection
The Pascal ET, ET-P, ET/IS, ET-P/IS can be equipped with up to two pressure modules and each
of them can handle up to three pressure sensors, two internals and one external with standard
accuracy.
Note:
The shown list on the screen depends on the installed, mounted and connected number of
sensors.
The sensor is identified by the measurement range and the measurement mode (g = gauge
pressure or a = absolute pressure). This information is displayed under the writing PE-1 (first
external sensor) or PE-2 (second external sensor). See the figure above as example.
When the sensor has been selected, the following screen appears: