WIKA CPH8000, Operating Instructions Manual, Page: 42 / 85

6 Commissioning, operation
42 WIKA Operating Instruction, Pascal ET, ET-P, ET/IS, ET-P/IS
GB
Figure 30
– “IN A” Selected
The calibrator is now set on the “IN A” module, and it select the last used unit for this module (in this
case the last used unit was “mV”). Press the button indicated with “Q” to change the unit from mV to
Tc and the following screen appears:
Figure 31
– Selecting the unit “Tc” for the module “IN A”
Press the button “Tc” and the main screen changes as follows:
Figure 32
– Module “IN A” with unit “Tc” selected
Q