Operating Manual Euromat TS 300
Page 35
Automatic Cooling before Pro Clean
Starts
- The cleaning program Pro Clean in the
TS 300 has an automatic cooling process
before it starts.
- If the temperature is over 60°C, the program
does not start immediatly.
The dispaly shows the actual temperature.
- The oven is cooled down to the right
temperature by injecting water
automatically. The program starts at 60°C
chamber temperature.
Overflow
- The appliance is fitted with an overflow
valve.
- possible causes for an overflow:
- dirty drains
- defective Magnetic Valves etc..
In the event of an overflow, the oven will
switch off automatically and the door is
locked.
Please contact Customer Service.
Important!
Read all of the provided instructions for
using the automatic Self-Cleaning Sy-
stem and advise your cleaning staff
accordingly.
10:30
Clean
01
Conventional
02
Pro Clean 1
03
Pro Clean 2
04
Pro Clean 3
05
Autostart Clean
Temperature
119 °C
too high!
08
Back
Important!
Before using the oven after a cleaning program:
-
Check that there are no cleaning material remnants in the cooking chamber.
Rinse again with water and wipe with a damp cloth.
- When using Ultra Clean cartridges, make sure to remove the empty containers after the
cleaning process.
Hinweis
