Operating Manual Euromat TS 300
Page 27
The Program is Running
- The conventional cleaning program
runs for approx. 30 minutes.
Steam is injected at intervals.
Baking remnants are loosened by the
moisture and can then be easily removed.
- The Program Parameters are displayed
during the cleaning program.
- The Symbol Spray Bottle blinks.
Open the oven door and apply the
recommended cleaning material to the
surface to be cleaned.
- Close the oven door.
- When the program is finished, the
oven must be washed with clean water to
ensure that there are no cleaning material
residues left in the baking chamber.
Please Note!
The Conventional Cleaning Program is in
preparation for manual cleaning. Only steam
is sprayed in. Dirt particles and grease
remnants are loosened and are then easier
to remove manually.
There is no chemical cleaning with Pro Clean
cleaner so that the conventional cleaning
program does not replace the Pro Clean
Cleaning Program.
Only used the cleaning materials, rinse aide
and decalcifiers recommended by the
manufacturer when cleaning the oven. Klar
The manufacturer does not accept any
liability for damages caused by the use of
other cleaning materials, rinse aides or
decalcifiers.
Hinweis
255
11:40
Conventional Cleaning
55
750 ml
003 min
250 ml
53 °C
Required
Actual
005 min
Stopping the Program
- if you want to stop the cleaning program
before the end, press the Stop Key.
