All information, illustrations and technical specifications in these operating instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification.
98
8.0 Maintenance
8.11. Replacing strip brushes
the strip brushes must always
be replaced in sets.
Undo the hexagon head bolts (A)
and replace strip brushes (B).
Fit the long brushes in the
middle and the short brushes on
the outside (see Fig. 498.122)
Screw in the hexagon head bolts
(A) manually.
Align the strip brushes.
Tighten the hexagon head bolts.
