All information, illustrations and technical specifications in these operating instructions are based on the latest information available at the time of publication.
We reserve the right to make design changes at any time without prior notification.
62
7.0. Operation
7.5. Operating the precise overseeding unit
7.5.5.7. Speed pulse
1. Select "Speed pulse" menu point.
The selection of the sensors is displayed.
2. Turn the turn-and-push button to select a sensor.
3. Confirm your selection by pressing the turn-and-
push button.
The current pulse number will be displayed.
4. Turn the turn-and-push button to change the pulse
number.
5. Confirm your selection by pressing the turn-and-
push button.
The entry will be confirmed.
The main menu will be displayed.
Advice
After completing the calibration run, the number of pulses recorded is automatically saved in this menu,
point 3.5.7. The controller calculates the speed using these pulses.
