Wiedenmann Terra Float Air Operating Instructions Manual Download Page 65

Page: 65 / 107

All information, illustrations and technical specifications in these operating instructions are based on the latest information available at the time of publication.

We reserve the right to make design changes at any time without prior notification.

7.0. Operation

7.5. Operating the precise overseeding unit

7.5.5.10. Residual discharge

4. Press the "Start/Stop" key or external Start/Stop but-

ton on the unit.

The residual discharge will be started.

"Residual discharge stop" will be displayed.

5. Press the "Start/Stop" key or external Start/Stop but-

ton on the unit.

The residual discharge will be stopped.

"Residual discharge start" will be displayed.

6. Press the ESC key.

The main menu will be displayed.

START/STOP

Esc

Summary of Contents for Terra Float Air












































































































Search results

Summary of Contents for Terra Float Air

Reviews:

Related manuals for Terra Float Air

Brands by name

Popular brands

Wiedenmann Terra Float Air, Operating Instructions Manual

Search results

Summary of Contents for Terra Float Air

Reviews:

Related manuals for Terra Float Air

Brands by name

Popular brands