All information, illustrations and technical specifications in these operating instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification.
42
6.0. Before initial operation
6.4.1. Preparing the precise overseeding unit
Lower the Terra Float with
precise overseeding unit into
the working position on a level
surface.
Adjust the upper guide bar so
that the upper edge of the
frame is parallel to the
ground.
Note
The precise overseeding unit is a pneumatic pellet
feeder for sowing seed.
Seed is regulated precisely by a rotary feeder that
is controlled depending on driving speed.
Automatic seed regulation takes place using a speed
sensor.
The spreader has an agitator for grit that flows with
difficulty. The grit is spread through eight hoses by
a stream of air.
6.4.2. Filling the precise overseeding unit
ATTENTION:
Risk of injury during operation if the spreading material hopper
is open, due to spread- ing material being thrown out and rotating
parts.
This can cause injuries to the eyes and crushing injuries.
•
Wear appropriate working and protective clothing during all work.
•
Always switch off the spreader and blower before opening the spreading material hopper
Advice:
Make sure that no foreign bodies (e.g. packaging
material) get into the hopper, in order to avoid
malfunc- tions
.
