All information, illustrations and technical specifications in these operating instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification.
41
6.0. Before initial operation
6.3. Adjusting the TERRA FLOAT
Lower TERRA FLOAT into working
position on a level surface.
Adjust the upper guide bar so
that the upper edge of the
frame is parallel to the
ground.
For adjusting the tension
springs,
tension the threaded rod
(B)
as
follows :
Rotating direction
C
= increasing tension
Rotating direction
D
= decreasing tension
Adjusting the adjustment screws
Screws must be adjusted so as
to prevent the rollers from
colliding.
The adjustment screws are set
to the measurement
"X" = 20 mm
.
This allows each roller to
rock from side to side by
approx. 5 degrees.
