All information, illustrations and specifications in these operating instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
53
8.0. Maintenance
8.4. Setting or Resetting the Cylinder Broom
CAUTION :
Before carrying out any work,
the engine of the machine and
the tractor engine must be
switched off.
- RISK OF INJURY !
The ideal distance between the
bristle tips and the front
conveyor wall is 10-20 mm.
Undo the screws
(A)
on the
flange bearings of the right
and left cylinder broom (not
illustrated).
Move the flange roller
bearings on the right and
left until the ideal
distance between the bristle
tips and the front conveyor
wall is reached.
Tighten the screws on the
flange roller bearings.
Check the V-belt tension on
the right side (see Chapter
8.7.). If required,
retension the V-belt.
INFORMATION
When the bristles have been
shortened by 30 mm by wear,
the ideal distance between the
bristle tips and the front
conveyor wall cannot be set
anymore. Replace the sweeping
bars.
