All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
18
2.0. Assembly
2.1. General Information
CAUTION !
Switch off the engine
before performing any work.
The ignition key must be
removed.
For this work, please use
your personal protective
equipment (PSA) such as:
gloves, goggles, ear
protectors.
2.2. Installing the lighting system
Lighting system
(A)
is screwed
with brackets
(B)
to the
existing holes of the hopper
gate.
Secure the electrical socket
(C)
on the existing hole
pattern.
Route the electrical cable with
the 7-pin plug to the fore.
Secure with the supplied
fastening clamps or cable ties.
NOTE:
Lay the electrical cable in
such a way that it does not rub
or become crushed.
