All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
33
4.0. Connecting to the Tractor
4.4. Adjusting the Universal-Joint Shaft
For adjusting the length hold the
two shaft parts side by side at the
shortest operating position and
mark them out.
Cut off the inner and outer sliding
profile by the same length as the
sheath tube.
Cut off the inner and outer sheath
tube evenly.
Smooth off division edges, remove
chips carefully. Lubricate sliding
profile.
