All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
44
6.0. Before Initial Operation
6.12. Converting the vibrating unit
Release clip lock
(A)
on both
sides.
Swing the hopper gate up
fully and place on the rubber
bearings.
Undo both star grip screws (
B
from below) the installed
riddle screen
(C)
and remove.
Pull the lower riddle screen
(C)
to the rear out of the
container.
Secure the disassembled
riddle screen on the front in
place of the supplied riddle
screen (hole size = 5 mm).
The selected riddle screen
(C)
must be pushed forwards
in the guide rail
(D)
until
it engages.
Attach the riddle screen from
below with both star grip
screws.
